Measure stream latency

[Adam MedziDski]

Is there an easy way to continuously measure stream latency? We use IP cameras with RTMP Push to Ant Media Server and then WebRTC to the viewers. We need a reliable way to tell how long the delay is in what we see. Ideally, it would be possible to get the percentile from this data later - e.g. for 99% of the time the delay does not exceed 1s.

[Ant Media Support]

Hi Adam Medziński,
Hope you are doing well.

Did you check https://github.com/ant-media/Ant-Media-Server/wiki/How-to-Measure-E2E-Latency

​

--

Best Regards,

Mohit Dubey

 

Star Ant Media Server on GitHub and get a chance to win an AMS Annual Enterprise Edition License.

On Tue, 3 Aug at 2:25 PM , Adam Medziński <adam@nomagic.ai> wrote:

Is there an easy way to continuously measure stream latency? We use IP cameras with RTMP Push to Ant Media Server and then WebRTC to the viewers. We need a reliable way to tell how long the delay is in what we see. Ideally, it would be possible to get the percentile from this data later - e.g. for 99% of the time the delay does not exceed 1s.

--
You received this message because you are subscribed to the Google Groups "Ant Media Server" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ant-media-server+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ant-media-server/8b43f830-28da-476a-8ccd-ac57e98a056bn%40googlegroups.com.

45212:1264838

[Adam MedziDski]

Somehow, I didn't notice this article, thank you!

 

 

[Ant Media Support]

Hi Adam Medziński,
Sure. Most welcome.

​

--

Best Regards,

Mohit Dubey

 

Star Ant Media Server on GitHub and get a chance to win an AMS Annual Enterprise Edition License.

On Wed, 4 Aug at 11:06 AM , Adam Medziński <adam@nomagic.ai> wrote:

Somehow, I didn't notice this article, thank you!

On Tuesday, August 3, 2021 at 5:33:33 PM UTC+2 support wrote:

Hi Adam Medziński,
Hope you are doing well.

Did you check https://github.com/ant-media/Ant-Media-Server/wiki/How-to-Measure-E2E-Latency

​

--

Best Regards,

Mohit Dubey

 

Star Ant Media Server on GitHub and get a chance to win an AMS Annual Enterprise Edition License.

On Tue, 3 Aug at 2:25 PM

Is there an easy way to continuously measure stream latency? We use IP cameras with RTMP Push to Ant Media Server and then WebRTC to the viewers. We need a reliable way to tell how long the delay is in what we see. Ideally, it would be possible to get the percentile from this data later - e.g. for 99% of the time the delay does not exceed 1s.

--

You received this message because you are subscribed to the Google Groups "Ant Media Server" group.

To unsubscribe from this group and stop receiving emails from it, send an email to ant-media-serv...@googlegroups.com.

To view this discussion on the web visit

https://groups.google.com/d/msgid/ant-media-server/8b43f830-28da-476a-8ccd-ac57e98a056bn%40googlegroups.com

.

--
You received this message because you are subscribed to the Google Groups "Ant Media Server" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ant-media-server+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ant-media-server/d71366f2-25d6-4226-ad44-1483001a5692n%40googlegroups.com.

45212:1264838