Problems with ssl

[A Hoaxer]

Hello Dear team,

I faced with strange issue. Ubuntu 16.04, antmedia server has been installed succesfully (with official instruction). Now it works fine with http (port 5080). SSL is needed so i decided to use enable_ssl.sh

script enable_ssl.sh -d antmedia.xxx.ru exit without error and it said that now i can use https://antmedia.xxx.ru:5443

But when i'm trying to open https://antmedia.xxx.ru:5443 browser says that  "antmedia.xxx.ru took too long to respond."

For now i can't reach antmedia server with ssl (5443) and CAN reach it with http (5080).

Could you please advice where i did mistake ? What should i look for ?

Thanks in advance

[Ray Jender]

Make sure you browse to https://antmedia.xxx.ru:5443/WebRTCApp/  if you are using the Community version.  otherwise I believe its WebRTCAppEE for enterprise.

On Thursday, June 20, 2019 at 7:56:55 AM UTC-4, a hoaxer wrote:

Hello Dear team,

I faced with strange issue. Ubuntu 16.04, antmedia server has been installed succesfully (with official instruction). Now it works fine with http (port 5080). SSL is needed so i decided to use enable_ssl.sh

script enable_ssl.sh -d antmedia.xxx.ru exit without error and it said that now i can use https://antmedia.xxx.ru:5443

But when i'm trying to open https://antmedia.xxx.ru:5443 browser says that  "antmedia.xxx.ru took too long to respond."

For now i can't reach antmedia server with ssl (5443) and CAN reach it with http (5080).

Could you please advice where i did mistake ? What should i look for ?

Thanks in advance

[A Hoaxer]

Hello Ray,

Thanks for your reply.

Unfortunately the same problem when I'm trying reach https://antmedia.xxx.ru:5443/WebRTCApp/

It looks like some problem with ssl (or cerificates)

четверг, 20 июня 2019 г., 22:29:14 UTC+3 пользователь Ray Jender написал:

Make sure you browse to https://antmedia.xxx.ru:5443/WebRTCApp/  if you are using the Community version.  otherwise I believe its WebRTCAppEE for enterprise.

On Thursday, June 20, 2019 at 7:56:55 AM UTC-4, a hoaxer wrote:

Hello Dear team,

I faced with strange issue. Ubuntu 16.04, antmedia server has been installed succesfully (with official instruction). Now it works fine with http (port 5080). SSL is needed so i decided to use enable_ssl.sh

script enable_ssl.sh -d antmedia.xxx.ru exit without error and it said that now i can use https://antmedia.xxx.ru:5443

But when i'm trying to open https://antmedia.xxx.ru:5443 browser says that  "antmedia.xxx.ru took too long to respond."

For now i can't reach antmedia server with ssl (5443) and CAN reach it with http (5080).

Could you please advice where i did mistake ? What should i look for ?

Thanks in advance

[mekya]

I've just checked and it's working for me now.

Thank you for your contribution @Ray Appreciate that :)

On Friday, June 21, 2019 at 10:03:55 AM UTC+3, a hoaxer wrote:

Hello Ray,

Thanks for your reply.

Unfortunately the same problem when I'm trying reach https://antmedia.xxx.ru:5443/WebRTCApp/

It looks like some problem with ssl (or cerificates)

четверг, 20 июня 2019 г., 22:29:14 UTC+3 пользователь Ray Jender написал:

Make sure you browse to https://antmedia.xxx.ru:5443/WebRTCApp/  if you are using the Community version.  otherwise I believe its WebRTCAppEE for enterprise.

On Thursday, June 20, 2019 at 7:56:55 AM UTC-4, a hoaxer wrote:

Hello Dear team,

I faced with strange issue. Ubuntu 16.04, antmedia server has been installed succesfully (with official instruction). Now it works fine with http (port 5080). SSL is needed so i decided to use enable_ssl.sh

script enable_ssl.sh -d antmedia.xxx.ru exit without error and it said that now i can use https://antmedia.xxx.ru:5443

But when i'm trying to open https://antmedia.xxx.ru:5443 browser says that  "antmedia.xxx.ru took too long to respond."

For now i can't reach antmedia server with ssl (5443) and CAN reach it with http (5080).

Could you please advice where i did mistake ? What should i look for ?

Thanks in advance