I have a technical question. We broadcast very often using hardware encoders such as LiveU LU300 or LU600. In these devices, the encoder profile can be selected from Main and High, so when I send a signal to the Ant Media Server to WebRTC apllication (main or high profile), the image is not smooth. However, when I send signal, for example, via vMix, with the baseline encoder profile, everything works very smoothly. What to do to send a WebRTC signal through the hardware encoder, so with the codecs LiveU uses, the image was smooth and 500 milliseconds delay.
Question
SebastianReg
Hi,
I have a technical question. We broadcast very often using hardware encoders such as LiveU LU300 or LU600. In these devices, the encoder profile can be selected from Main and High, so when I send a signal to the Ant Media Server to WebRTC apllication (main or high profile), the image is not smooth. However, when I send signal, for example, via vMix, with the baseline encoder profile, everything works very smoothly. What to do to send a WebRTC signal through the hardware encoder, so with the codecs LiveU uses, the image was smooth and 500 milliseconds delay.
Link to codec profile:
1. High profile
2. Profile Main
3. Profile Baseline
Link to comment
Share on other sites
Top Posters For This Question
1
1
Popular Days
Apr 17
1
Apr 19
1
Top Posters For This Question
Yash 1 post
SebastianReg 1 post
Popular Days
Apr 17 2023
1 post
Apr 19 2023
1 post
Popular Posts
Yash
Hi @SebastianReg I hope you are doing well. I tried streaming using OBS studio with profile as main and high on my local AMS and streaming appears to be fine, as does restreaming to YouTube. Cou
1 answer to this question
Recommended Posts